To use the electric air pump, start by opening the three condensate switches and turning on the power switch. Let the pump idle for about 3 minutes and then turn off the condensate switch. This will ensure proper functioning of the pump and prevent any damage.
For a fail-safe measure, follow the ultimate safety valve check procedure: first, activate the power and disable the condensate switch as well as the regulator switch. Monitor the pressure gauge reading until it reaches 330 bar. At this point, inspect whether the safety valve has been unloaded. If not, immediate replacement is crucial to ensuring safety. Conversely, if the safety valve appears to be functioning properly, deactivate the power supply. Proceed by opening the condensate switch to release any accumulated condensate water. Ensure that the regulator port is directed towards the ground and carefully unscrew the switch to expel any remaining gas inside. Take note that during the unloading process, it is of utmost importance not to face the regulating valve port towards individuals to prevent unnecessary injuries.
To initiate the inflation process, follow these steps carefully for optimal results. Begin by connecting the inflation bottle, ensuring a secure attachment. Prior to proceeding, open the regulating valve switch and subsequently open the cylinder valve to its maximum capacity. Once these initial steps are completed, activate the power switch and closely monitor the pressure gauge for any changes. It is essential to keep a watchful eye until the pressure reaches 300 bar. At this point, promptly switch off the power before proceeding further. Remember, it is crucial to never alter the order of the mentioned steps.
During the inflation process, it is advisable to discharge the condensate every 15 minutes. This ensures smooth functioning and prevents any issues that may arise due to excess moisture. After completing the inflation process, ensure the condensate is discharged, and all remaining air within the pipe is removed. Take caution during this step and ensure the gas outlet is facing the ground, maintaining safety precautions.
By following these guidelines diligently, you can confidently complete the inflation process efficiently and effectively.
Before continuing to inflate, it is important to tidy up the machine and wait for at least 10 minutes. This ensures that the machine is properly cleaned and prepared for use. Taking the time to tidy up also helps to prevent any potential issues or malfunctions that may arise if the machine is not properly maintained. So be sure to take the necessary steps to keep your machine in good condition and ready to use whenever you need it.